首页 >> News >> Industry News


The actual operation of heat transfer paper in the whole transfer process to achieve the best state

1. Before batch heat transfer, please make a heat transfer sample to confirm that the temperature and time of the transfer machine that interferes with the color are appropriate.

2. Before heat transfer printing, make sure that the hot transfer paper is basically dry to prevent insufficient heat transfer printing and dirt.

3. Before heat transfer printing, it is necessary to blow and comb the patterns of hot transfer paper and clothing fabrics, and remove the paper fragments, cilia and other attachments on clothing fabrics and ink-jet printing heat transfer paper, so as to prevent the printing defects caused by such garbage sandwiched between the ink-jet printing heat transfer paper and clothing fabrics.

12.jpg

4. Ghosting is usually caused by the separation speed of the press plate is too fast, and the air flow of the upper press plate adsorbs the ink-jet printing heat transfer paper. At this time, the small flow valve should be adjusted to slow down the separation speed of the cylinder (or cylinder) of the plate heat transfer machine, so as to prevent the thermal transfer ink-jet printing heat transfer paper from being sucked up and floating down, resulting in sublimation transfer again. To prevent ghosting, you can dip water on the four sides of the ink-jet printing heat transfer paper to adhere to the fabric for transfer or choose the ink-jet printing heat transfer paper.

5. Because the pad material (cotton cloth, sponge, cardboard, etc.) of the bottom plate will cause too much water vapor in the heat transfer printing after absorbing the moisture accumulation of ink, which will make the color of the pattern on the heat transfer printing cloth lighter, and some of them will appear the water mist pattern, so before and during the whole process of heat transfer printing, the moisture on the pad cotton cloth should be evaporated by air and hot pressing frequently, if possible That is, to remove and replace the dry liner material to prevent such things.

6. During the whole process of plate transfer, pay special attention to the actual operation safety, do not put your hand under the hot pressing plate, and pay special attention to prevent high temperature burns

13.jpg


In the previous:How about the Epson nozzle
The next article:Can laser marking machine be used in automobile interior?